Bestway Slide-In Manual Del Usuario página 3

WARNING
Never leave your child unattended – drowning hazard.
• Only for domestic use.
• Only for outdoor use.
• Children can drown in very small amounts of water. Empty the
pool when not in use.
• Do not install the paddling pool over concrete, asphalt or any
other hard surface.
• Place the product on a level surface at least 2 m from any
structure or obstruction such as a fence, garage, house,
overhanging branches, laundry lines or electrical wires.
• Recommend back towards the sun when playing.
• Modification by the consumer of the original paddling pool
(for example the addition of accessories) shall be carried out
according to the instructions of the manufacturer.
• Keep assembly and installation instruction for future reference.
• Do not exceed the maximum weight of slide: 144kg / 317lbs.
Preparation
Installation of small swimming pool usually takes only 10 minutes
with 1 people
Recommendations regarding placement of the pool:
• It is essential the pool is set up on solid, level ground. If the
pool is set up on uneven ground it can cause collapse of the
pool and flooding, causing serious personal injury and/or
damage to personal property. Setting up on uneven ground will
void the warranty and service claims.
• Do not set up on driveways, decks, platforms, gravel or asphalt.
Ground should be firm enough to withstand the pressure of the
water; mud, sand, soft / loose soil or tar are not suitable.
• The ground must be cleared of all objects and debris including
stones and twigs.
• Check with your local city council for by-laws relating to fencing,
barriers, lighting and safety requirements and ensure you
comply with all laws.
Assembly
Warning: Adult assembly required.
1. Open the safety valves and inflate the parts one by one. Be
sure to close the valve after inflation. Air pump is not included.
Note: Do not over inflate. Do not use either an air compressor
or compressed air.
2. Open the water valve to fill water in the water chamber.
3. Connect your garden hose to the Hose Adapter.
4. Slowly fill the pool to a proper water level, if there is a fill line,
reach but do not exceed the fill line on the pool's interior.
DO NOT OVERFILL as this could cause the pool to collapse.
ATTENTION: Do not leave pool unattended while filling with
water.
Proper Water Level
NOTE: All drawings for illustration purpose only. May not reflect
actual product. Not to scale.
Empty the pool
1. Check local regulations for specific directions regarding
disposal of swimming pool water.
2. Deflate all the air chambers, at the same time push down the
wall of the pool to release the water. Make sure release all the
water in 20 minutes.
NOTE: Drain by adult only!
Pool Maintenance
Warning: If you do not adhere to the maintenance guidelines
covered herein, your health might be at risk, especially that of
your children.
• Change the water of pools frequently (particularly in hot
weather) or when noticeably contaminated, unclean water is
harmful to the user's health.
• Please contact your local retailer to obtain chemicals to treat
the water in your pool. Be sure to follow the chemical
manufacturer's instructions.
• Proper maintenance can maximize the life of your pool.
• See packaging for water capacity.
Cleaning and Storage
1. After use, use a damp cloth to gently clean all surfaces.
Note: Never use solvents or other chemicals that may
damage the product.
2. Air dry the pool, once pool is completely dry, fold pool carefully
and put back to its original packing. If pool is not completely
dry, mould may result and will damage the pool.
3. Store in a cool, dry place and out of children's reach.
4. Check the product for damage at the beginning of each
season and at regular intervals when in use.
Repair
If a chamber is damaged, use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
3