Assembly; Storage - Shark Rocket HV320 Serie Manual De Instrucciones

ASSEMBLY

STEP 1
CLICK
1 Insert the wand into the floor nozzle connector until
you hear a "click".

STORAGE

OPTION 1
STEP 2
CLICK
2 Insert the handheld portion into the top of the wand
until you hear a "click".
OPTION 2
1. 8 0 0 . 7 9 8 . 7 3 9 8
STEP 3
3 This vacuum comes with a detachable clip to store
up to 2 accessories on board. Snap clip on to the
wand. Store one accessory on top holder and one
accessory on bottom holder.
Recommended ways to store vacuum.
OPTION 1: Press the WAND RELEASE button on the top of
the wand to release the handheld vacuum. There is a catch
on the bottom of the handheld vacuum. Hang it from the
hook located on the bottom portion of the wand. Wrap the
cord around the two cord hooks.
OPTION 2: Use the wall mount that is included. Drill two
5/16" holes and insert plastic anchors provided into the
wall. Using a Philips head screwdriver, screw the wall
mount into the plastic anchors. There is a catch on the
bottom of the handheld vacuum. Hook it onto wall mount.
OR
OR
5