Taurus ELECTRIFYING 34 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
- Place the other end in the support for rotis-
series arm placed on the left wall, placing the
notch of the arm on the support.
- REMEMBER: Once finished, this rotisserie
arm will be really hot. Use the Rôtisserie's arm
handle to remove it and be aid with some coo-
king gloves to remove the rotisserie arm from
the prepared food.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Switch off the appliance by placing all the
selectors in the switched off position (Min,
,
, O)
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- All the accessories are able to be cleaned in a
dishwasher.
- Then dry all parts before its assembly and
storage.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Electrifying 45Electrifying 60Electryfing volcan

Tabla de contenido