Using Your Ceiling Fan - LUCCI Air AIRFUSION PEREGRINE Manual De Instalación

AIRFUSION PEREGRINE Installation Instructions
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 11)
1. Locate a suitable wall to fix the remote control holder with the 2 screws. (Fig.11a).
2. Slide the remote into the holder to rest the remote. (Fig. 11b)
NOTE: The remote and receiver will need to be paired after the installation of the ceiling fan.
NOTE: When two or more ceiling fans are installed in one location, please refer to the
instruction on the next page.
BATTERY INSTALLATION Fig. 12
BEFORE USING THE REMOTE TRANSMITTER
1 pc 3V CR2032 battery is required to operate the remote control.
1. Battery CR2032 is pre-installed in the remote. For first time use of the remote, remove the battery film before use.
(Fig. 12 a)
10 | P a g e
Fig. 11a

USING YOUR CEILING FAN

Battery film
Battery film
Fig. 11b
Fig. 12a