Steelcase Answer Back Painted Glass Skins Manual De Instrucciones página 3

®
Installing Back Painted Glass Skins
(continued)
NOTE: Step 3 is for back painted glass
skin 42" or wider only.
3.
If the back painted glass skin is 42" wide
(or wider) the black plastic aligner clip at the
3a
bottom edge of the skin will also need to be
3b
engaged (3a). Simply compress the plastic
tab upward (3b) until it clears the top edge
of the skin below. Lightly press the back
painted glass skin on center at the bottom
(3c) to engage the clip between the light
seal and frame of the skin below.
3c
Page 3 of 12
25394101 Rev A