Steelcase Answer Back Painted Glass Skins Manual De Instrucciones página 4

®
Removal of Back Painted Glass Skins
Back painted glass skins must be removed
from the top down.
The Pathways skin removal tool is helpful to
disengage attachment clips on Answer Back
Painted Skins.
1.
Starting at the lower corners and working
upward, disengage attachment tab features
(noted on step 2 of page 2) until all are disengaged
from attachment slots. The back painted glass skin
will angle out from the bottom but still hang on the
panel due to the hook engagement.
2.
Lift up while pulling lightly in an outward
direction to disengage the hook features.
1 2
SKIN REMOVAL TOOL
1
2
Page 4 of 12
25394101 Rev A