Noise/Vibration Information; Declaration Of Conformity - Bosch WEU PTK 3,6 LI Manual Original

English | 25

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product is 76 dB(A).
Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a and uncertainty K determined according to
h
2 2
EN 60745: a <2.5 m/s , K= 1.5 m/s .
h
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a pre-
liminary assessment of exposure.
The declared vibration emission level represents the main applications of
the tool. However if the tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also take into ac-
count the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator from the ef-
fects of vibration such as: maintain the tool and the accessories, keep
hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product described un-
der "Technical Data" is in conformity with the following standards or
standardization documents: EN 60745 (battery powered products) and
EN 60335 (battery chargers) according to the provisions of the directives
2011/65/EU, 2006/95/EC, 2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
07
Bosch Power Tools 1 619 929 L03 | (16.3.12)