Setting Up And Using The Itouch Sure; Installation Of Batteries - TensCare itouch sure Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Time used
in minutes
12. SETTING
USING
THE
SURE
12.1. INSTALLATION
BATTERIES
1) Remove the battery cover: Press
down in the centre and slide
backwards in direction of raised
arrows.
2) Insert batteries: Ensure that the
batteries are inserted the right way
as shown in battery compartment
and that the ribbon is behind them.
3) Replace the battery cover.
When the batteries are running low, a
low battery indicator BATT will show on
the screen and it is important to change
the batteries as soon as possible.
Rechargeable batteries
The unit will work with rechargeable
batteries, but the display may appear
dim.
Average
strength
used
UP
AND
ITOUCH
OF
19
Caution: Remove batteries
from your itouch sure if the
unit is unlikely to be used for a
long period. Some types of batteries
may leak corrosive fluid.
Battery Life
Batteries should last at least 15 hours
at 50 mA, 300 μs, 50 Hz.
Unused batteries have a nominal shelf
life of 1 year, but will usually last longer
than this.
Battery Warnings
Do NOT pierce, open, disassemble, or
use in a humid and/or corrosive
environment.
Do NOT expose to temperatures over
60°C(140F).
Do
NOT
put,
leave near sources of heat, in direct
strong sunlight, in a high temperature
location, in a pressurized container or in
a microwave oven.
Do NOT immerse in water or sea water,
or get wet.
Do NOT short-circuit.
Do NOT connect the device unless the
battery cover is in place.
Keep batteries out of the reach of
children
to
prevent
swallowing
them
swallowed by child, contact
healthcare professional immediately.
If battery leakage occurs and comes in
contact with the skin or eyes, wash
thoroughly with lots of water and
immediately seek medical attention.
store
or
them
from
by
mistake.
If
your

Hide quick links:

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido