Emmaljunga Super Nitro Manual De Instrucciones página 30

Assembly of seat-unit
6
7
8
12
9
10
30
• Fasten both fabric armrests over the sides of the seat unit.
• Place the footrest cover (10) over the footrest and attach it with the
press studs through the gaps in the seat-unit plate. Place the har-
ness crotch strap through the footrest cover and then through the
seat fabric.
IMPORTANT
• Always make sure that the crotch strap go through the plastic bot-
tom, the foot rest cover and the fabrics when used in either inner
10
and outer position.
• The footrest pad is reversible
WARNING!
• Never let your child/children stand on the footrest!
Assembly of the bumper bar cover
• Place the bumper bar protection (11) over the bumper bar and zip.
• Fasten the crotch strap (12) around the bumper bar.
11
Assembly of Hood
• Press the two plastic legs, one on each side of the hood, into the
two plastic holders on the seat frame, one on each side.
Make sure they snap into place.
• Press the press studs into place on both sides of the hood
Assembly of Apron (Accessory)
• Slip the apron over the footrest and pull toward the front of the
hood. Snap the apron onto the four press-studs, two on each side
of the hood.
IMPORTANT
• The hood cannot be pushed back with the apron attached.
Manual Super Nitro v. 3.2