Assembly and usage of the chassis
6
7
6
5
8
7
9
10
9
8
32
Engaging the parking device
• Engage the parking device by pushing it down with your foot.
• Disengage the parking device by pulling up
WARNING!
• Never leave the vehicle without first engaging the parking device.
• The brake should always be engaged when you lift your child in
and out of the stroller/pram.
• Avoid uphill or downhill parking.
• Make sure that the cogs are attached properly on both back
wheels.
• Make sure that the brake pin engages into the cogs when the ve-
hicle is parked.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the chassis
• Start by making sure that the brake is engaged.
• When folding: Make sure the Adjustable Comfort System is set in
the highest position to avoid pressure marks on the rear wheels
while the chassis is in the folded position.
• Ensure the front wheels ar in the swivel position by pulling the lock-
ing ring up.
• Fold the chassis by first pressing in the buttons (5) at the same time
and pull the two main locking devices, one on each side upwards
(6).
• Lift the secondary locking device (7) and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap's release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.
• Attach the shopping tray to the chassis according to the included
instruction.
• The tray is already fitted on delivery but it can be removed for
washing. Remove the wooden plate before washing.
How to adjust the height of the handle
• Adjust the height by pressing the grey buttons on the inside of the
handle (8). Keep the buttons pressed in while you adjust to the
required position (9)
Manual Super Nitro v. 3.2