Eldom fitto BLP10 Manual De Instrucciones página 9

DESCRIPTION OF PARTS (Fig. 1)
A. Universal cap
B. Container
C. Blade
D. Socket
E. Base
F. On/off switch
TECHNICAL DATA
power: 300 W
supply voltage: 230V ~50Hz
max. time of continuous operation: 30 seconds
idle time before recommencing operation: 1 minute
PURPOSE
The purpose of the BLP10 personal blender is
quick preparation of tasty and nutritious beverages.
The universal cap (A) changes the container (B)
into a convenient drinking bottle equipped with a
handy mouthpiece for drinking, and with a hook for
connecting it to e. g. a belt or a backpack.
HOW TO USE
Before first use, wash all the parts of the blender that
come into contact with food: cap (A), container (B) and
blade (C).
Note:
The blade is sharp. Never completely immerse the blade
in water. Before attaching the blade, dry it thoroughly.
- Place the container (B) on a flat and horizontal
surface, with the opening facing up, and insert the
OPERATING INSTRUCTIONS
PERSONAL BLENDER BLP10
ingredients in the container. The ingredients should
be cut into small pieces. The ingredients should not
stand out above the maximum level marked on the
container (B).
- Attach the blade (C) onto the container (B) and
tighten it (Fig. 2).
- Rotate the container (B) and place it in the socket (D)
as shown by the markings (Fig. 3).
- Lock the container (B) in the base (E) by turning it
clockwise (Fig. 4).
The device is protected against activation if the
container (A) is not properly attached.
- Connect the device to the mains.
- To start the device, press and hold the (F) button. The
shredder will continue operation as long as the (F)
button is pressed. For best results activate the device
in short pulses.
Do not activate the device, if it is empty.
A
B
C
EN
D
F
E
EN|9