Product Description; Installation And Start-Up; Module Configuration; Display Function - Fagor evo PRO 300 Manual Del Usuario

■ PRODUCT DESCRIPTION

evo
PRO 300 is a programmable unit that includes high selectivity filtering up to 32 channels from
its VHF / UHF inputs converting them to any output channel. All the output channels are combined
in one equalized RF output that can be amplified to an optimum level for distribution.
It also has two independent FM and SAT inputs for separate amplification of these signals. Once the
output level of each band is adjusted, the signals can be successfully distributed within a multi-
dwelling building.
Main features:
 32 filters of variable bandwidth and high selectivity for the
conversion of the terrestrial TV input channels.
 Internal Pre-Amplifier with Automatic Gain Control (AGC) to
compensate the input signals differences.
 Power to external VHF / UHF preamps.
 Selection of satellite polarity and LNB power.
 Auto-Scan: Automatic search of the channels present in each VHF / UHF input.
 Automatic measurement of the input level of the channels to be processed.
 High rejection SAW filter to 4G and 5G LTE signals, to minimize their interference.
 Output level configuration up to 109 dBµV to increase the signal distribution.
 Easy programming of the module using the keyboard and LCD display or an Android APP.

■ INSTALLATION AND START-UP

 Connect the equipment ground point to the installation ground point, (6), page 2 Controls.
 Connect the antennae cables to the corresponding inputs and close the free inputs with 75 charges
(Ref. 84011)
 Connect evo PRO 300 to the electrical mains.
 Connect the output cables to the signal distribution network.
 evo PRO 300 is an indoor unit designed to operate in a temperature range of 0~50ºC, but it's
recommended to install the device in a temperature-controlled environment to ensure its optimum
behavior and to maximize the product life. Also, it's necessary to not expose the unit to rain or
moisture.

■ MODULE CONFIGURATION

evo PRO 300 can interact with the user in two ways:
 With an Android device connected by USB-OTG to the module and using the corresponding APP
"EVO PRO 300" that can be downloaded from the Google Play Store.
 Through the display included in the module that allows checking and modifying its parameters'
configuration. A keypad is also provided with the module, consisting of four buttons with arrows, that
allows the user moving through the configure menu diagrams shown in pages 6 and 7.

Display function

First line indicates the parameter group to
be accessed or the parameter to configure.
Second line shows the parameter to be
accessed or its actual value.
Key buttons functions
The buttons with the up / down arrows allow:
 Choose a parameter group or a parameter.
 Change the value of a parameter.
The buttons with the left / right arrows allow:
 Enter or exit the menu function.
 Move along the characters of a parameter value.
14