FULLMATIC OPTION:
Wash the entire body with а damp cloth.
Empty the flour recovery tray (DIV-R only) (fig.6, n
With the head in the lowered position, press the knife raise button in order to raise the knives.
Activate the emergency stop and remove the side doors using а screwdriver.
Using а vacuum cleaner, clean all over the inside of the machine as well as the mechanical
components.
Refit the side doors.
8.3
Six-monthly, Ьу an approved agent.
Place the head in the lowered position.
Operate the emergency stop and remove the right-hand side door using а screwdriver.
Check oil level. (The level must Ье between 4 and 5 cm from the top edge of the aluminium flange).
NOTE: Below you will find а non-exhaustive list of compatiЫe hydraulic oils:
Check that your approved agent has recorded his work in your service booklet in order to maintain
your 5-уеаг warranty cover.
9
CONSUMABLES
When ordering spare parts, check with your approved agent which part is required based оп the
spare parts catalogue issued Ьу the manufacturer.
Always quote the machine serial number shown оп the nameplate.
Your agent will place the orders with JAC.
9.1
List of CONSUMABLES
IТЕМ CODE
NEW DESCRIPTION
F1500009
LID SEAL
F1500004
LID SPRING
F1512014
GRID SPRING
10040012
WEAR PLATE
HUILEHYDROS46
HYDRAULIC OIL
F140000311
DOUBLE EXCENTRIC
юв�
English
CONDAT
ELF
CASTROL
TOTAL
12
°
18).
HYDROLUB S46
HYDRELF OS46
AYSPIN AWS46
AZOLLA ZS32
MODEL
DIV-R
ALL
ALL
ALL
ALL
ALL