Braven 570 Guia Del Propietario página 3

TURN ON & BLUETOOTH PAIRING
1. Slide the power switch up to the "on"
position. You will hear the BRAVEN
power up sound.
2. Activate Bluetooth on the phone or
®
device you are pairing with
device's instruction manual for information
®
on activating its Bluetooth
3. Press and hold the Pairing Button on
the BRAVEN speaker until the Pairing
Status light begins to flash rapidly
and you hear the BRAVEN pairing
sound.
(see your
.
settings)
4. Go to your phone or device's
Bluetooth settings and select the
®
BRAVEN device from the list.
5. If asked for a passcode enter "0000"
You only need to do this once for each device you are
pairing to your BRAVEN speaker. Your BRAVEN speaker
will remember the last 8 devices it has paired with.
NOTE: If the BRAVEN does not have an active
Bluetooth connection and is left on, it will shut
®
itself off after 30 minutes. To restart the BRAVEN
you will need to slide the Power Switch to the
position and then back to the
"off"
"on" position.
3