ELEMENTS AND DIMENSIONS..................................................................................................................................................2
STANDARD INSTALLATION IN DETACHED HOUSE .....................................................................................................................5
INSTALLATION OF ADDITIONAL ELEMENTS.............................................................................................................................11
D O O R E N T R Y S Y S T E M S KITS SYSTEM WITH INTERNAL COMMUNICATION ENTRANCE PANEL TELEPHONE INDEX ELEMENTS AND DIMENSIONS..............................2 GENERAL OPERATION OF THE DOOR ENTRY SYSTEM WITH INTERNAL COMMUNICATION............3 STANDARD INSTALLATION IN DETACHED HOUSE ........................5 STANDARD INSTALLATION IN SEMI-DETACHED HOUSE.
D O O R E N T R Y S Y S T E M S ELEMENTS AND DIMENSIONS Entrance panel Flush-mounted box. 1, 2 storeys. Surface box. 1, 2 storeys. Power supply Telephone for internal communication ENTRANCE PANEL - INSIDE MODULES Audio unit...
D O O R E N T R Y S Y S T E M S GENERAL OPERATION OF THE DOOR ENTRY SYSTEM WITH INTERNAL COMMUNICATION MAKING A CALL FROM ONE TELEPHONE TO ANOTHER To call another telephone, pick up the receiver and press the second button on the telephone. MAKING A CALL TO A DWELLING FROM THE ENTRANCE PANEL Press the appropriate pushbutton on the entrance panel.
Página 4
D O O R E N T R Y S Y S T E M S RECEIVING A CALL FROM THE ENTRANCE PANEL TO A TELEPHONE WHICH IS COMMUNICATING WITH ANOTHER TELEPHONE If the telephone in the dwelling being called from the entrance panel is already communicating with another telephone, its receiver will emit several warning tones, allowing you to choose whether to speak to the visitor or to continue communicating with the other telephone.
D O O R E N T R Y S Y S T E M S STANDARD INSTALLATION IN DETACHED HOUSE - SINGLE-WIRED DIAGRAM - SECTION TABLE Up to 50 m - Up to 25 m - Up to 100 m - Electric lock AC (Not included) Use separate cable hose Operation -...
Página 6
D O O R E N T R Y S Y S T E M S WIRED DIAGRAM - GRF-202 cod. 9610041 Electric lock AC (Not included) Use separate cable hose.
D O O R E N T R Y S Y S T E M S STANDARD INSTALLATION IN SEMI-DETACHED HOUSE. INTERNAL COMMUNICATION BETWEEN DWELLINGS - SINGLE-WIRED DIAGRAM - Dwelling 1 Dwelling 2 SECTION TABLE Up to 50 m - Up to 25 m - Up to 100 m - Electric lock AC (Not included)
Página 8
D O O R E N T R Y S Y S T E M S WIRED DIAGRAM - Dwelling 1 Dwelling 2 GRF-202 cod. 9610041 Electric lock AC (Not included) Use separate cable hose.
D O O R E N T R Y S Y S T E M S INSTALLATION IN SEMI-DETACHED HOUSE. INTERNAL COMMUNICATION IN EACH DWELLING (KIT + 2 TELEPHONES) - SINGLE-WIRED DIAGRAM - Dwelling 1 Dwelling 2 SECTION TABLE Up to 50 m - Up to 25 m - Up to 100 m - Electric lock AC (Not included)
Página 10
D O O R E N T R Y S Y S T E M S WIRED DIAGRAM -...
D O O R E N T R Y S Y S T E M S INSTALLATION OF ADDITIONAL ELEMENTS DOOR OPENING FROM INSIDE GRF-202 cod. 9610041 Push-button Push-button CONNECTION OF THE AUXILIARY PUSH-BUTTONS (TELEPHONE TIN-024) Terminals number 26, 27 and 28, 29 are potential-free contacts. To use them, take into account the following connection limitations: 50 mA - 12 Vdc.
D O O R E N T R Y S Y S T E M S I N S TA L L I N G I N S T R U C T I O N S RECOMMENDATIONS - When installing the entrance panel make sure that the sunrays or intense light sources do not fall directly on the video unit, avoiding nonwhished effects in picture display (backlight effect) and same way keeping the operational life of the equipment.
Página 13
D O O R E N T R Y S Y S T E M S ENTRANCE PANEL Lever open the cover of the card-holder and insert the card that identifies the pushbutton MOUNTING THE ENTRANCE PANEL IN A FLUSH-MOUNTED BOX Place the rings of the panel over the extracted fixing pins.
Página 14
D O O R E N T R Y S Y S T E M S Make the electrical connections. See wired diagrams. Once the connection of the other components of the installation have been made, you will be able to make calls.
Página 15
D O O R E N T R Y S Y S T E M S POWER SUPPLY Install the power supply unit in a dry, well-ventilated place away from direct sources of heat. Avoid blocking the ventilation slots. Protect the power supply unit by complying with existing regulations governing electrical installations (avoid high-temperature locations and strong magnetic fields, ensure correct fusing, etc.).
Página 16
D O O R E N T R Y S Y S T E M S Cut the required perforated openings of the terminal cover. Fix it to the power supply unit using the fixing screws. TELEPHONE Remove the cover from D i s c o n e c t t h e c o r d the base of the telephone.
D O O R E N T R Y S Y S T E M S ADJUSTMENT INSTRUCTIONS ENTRANCE PANEL Adjust the volume level on the entrance panel and Separate the upper and lower decorative fittings, on the telephones (1). by loosening the clamping screws.
Note: Reference values are provided only to enable the checking of equipments and are reliable. Do not use the terminals of the equipments to feed additional devices without first consulting the manufacturer. ENTRANCE PANEL - AUDIO UNIT GRF-202 - Voltage Power supply...
Página 19
D O O R E N T R Y S Y S T E M S POWER SUPPLY ALA-020 Voltage Mains supply Power Voltage Output Current Operating temperature - TELEPHONE Internal communication TERMINALS AT REST WORKING Door entry system TERMINALS AT REST WORKING Audio max.
D O O R E N T R Y S Y S T E M S TROUBLE SHOOTING Check the connections between the different elements. Check The card holders don't light up. Check that the voltage between and V of the power the voltages in the different terminals (see Technical supply is 12 ±...