Angle Adjustment - Interlogix TruVision TVD-DOME6-HR Guia Del Usuario

EN
Overview
This is the TruVision TVD-DOME6-HR and TVD-
DOME5-HR-9 Camera Pocket Guide. This pocket
guide describes a standard installation.
Installation
To install the camera:
1. Fasten the camera to a wall or ceiling
(or another solid surface). The camera must be
stable when connected.
2. Connect the 75 Ω coaxial cable to the video
output.
3. Connect the power cable to the camera.
4. Adjust the camera position and angle as
required.

Angle adjustment

To adjust the vertical angle of the platform up to
180 degrees, turn the platform (Figure 3A on
page 6).
EN 10