Interlogix TruVision TVD-DOME6-HR Guia Del Usuario página 13

To adjust the horizontal angle of the rotor up to 350
degrees, turn the rotor on the platform (Figure 3B
on page 6).
Focus and zoom
To adjust the camera zoom and focus, see Figure 4
on page 8 and do the following:
1. Loosen the zoom ring thumbscrew (Figure 4A).
2. Turn the zoom ring to set the desired zoom.
3. Tighten the zoom ring thumbscrew.
4. Loosen the focus ring thumbscrew (Figure 4B).
5. Turn the focus ring to set the desired focus.
6. Tighten the focus ring thumbscrew.
Maintenance
To clean inside and outside the camera, do not use
any organic or corrosive cleaning solutions. When
cleaning the camera, turn off the power, and use a
clean cloth with some water.
11 EN