Play Mode; Program Mode - SOUNDMASTER RCD1250SW Manual De Instrucciones

PLAY MODE

1. Set the POWER / FUNCTION switch to "CD/USB".
2. Press the OPEN button to open the CD door. Insert the CD with labeled side to you.
3. Close the CD door. The unit will begin reading and starts automatically playing the music.
4. Press the button to interrupt the playback. Press it again to resume the playback.
5. Press the /
6. Press the /
7. Press the button to stop playing the disc.
8. To turn the radio off set the POWER / FUNCTION switch to "OFF".
REPEAT MODE
Repeat one track
During playback press the REPEAT button once to repeat
playback of the song you are listening to.
Repeat all tracks
During playback press the REPEAT button twice to repeat
all songs from the CD.
To cancel the Repeat mode press the REPEAT button until all symbols in the display disappear.
Even if you press the
you switch to other functions.

PROGRAM MODE

You can program up to 20 songs.
1. During stop press the PRG button. "P01" (program track) and the
PROG-symbol flashes in the display.
2. Press the /
want to program and press the PRG button. If the track is
programmed the display change to "P02".
3. Repeat step 2 to program more tracks.
4. When the registration is complete press the
If there is no signal the unit will switch off after 15 minutes. To start the unit again switch it off
and start it again.
button to select another track on the disc.
button for fast forward or fast rewind the track.
button the mode will be canceled, when you open the CD door or when
button to select the track number which do you
CD MODE
button to start the programmed playback.
3
RCD1250 / English Instruction Manual