Basic Operation; To Listen To Music - Pioneer SUPER TUNER III KEH-P4950 Manual Del Usuario

Basic Operation

To Listen to Music

The following explains the initial operations required before you can listen to music.
Note:
• Loading a cassette in this product. (Refer to page 7.)
1. Select the desired source. (e.g. Tuner)
Each press changes the Source ...
Each press of the SOURCE/OFF button selects the desired source in the following order:
CD player (one disc only) = Tuner = Tape = Multi-CD player = External Unit
= AUX
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Only one External Unit can
be controlled by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* When no tape is set in this product.
* When no magazine is set in the Multi-CD player.
* When no disc is set in the CD player.
* When the AUX (external input) is set to OFF. (Refer to page 23.)
• When this product's blue/white lead is connected to the car's Auto-antenna relay control terminal,
the car's Auto-antenna extends when this product's source is switched ON. To retract the antenna,
switch the source OFF.
2. Raise or lower the volume.
3. Turn the source OFF.
Hold for 1 second
5