eTIGER ES-K1A Manual Del Usuario página 10

Register the ES-K1A in the control panel
Make sure the control panel is in Connection mode (refer to the user manual of your eTIGER
alarm system).
Press Arm [ ] or Home Mode [ ] on the
keypad to unlock it.
Type your user code or admin code on the
keypad, and then press any of the Arm
[ ], Disarm [ ] or Home Mode [ ] keys.
Your hear short beeps: the registration has
succeeded.
Default admin code : 123456. Default user code : 1234
The control panel of your alarm system can be controlled from distance on the keypad
once the latter has been registered in the control panel.
Connect the ES-K1A to an eTIGER siren
The ES-K1A can be connected to an eTIGER indoor or outdoor siren, which enables you
to trigger the siren by pressing the [SOS] key on your keypad.
To connect the keypad to an eTIGER siren, set the wireless siren to Connection Mode
(refer to the manual of your eTIGER siren if necessary). Press the Arm [ ] or Home Mode
[ ] key on the keypad to switch to Normal Mode. Then type [your admin code or user
code] and press any of the Arm [ ], Disarm [ ] or Home Mode [ ] keys on the keypad.
For more information on sirens and accessories compatible with eTIGER security
systems, visit our website etiger.com
10