eTIGER ES-K1A Manual Del Usuario página 16

If the exit delay has been set, the control panel will beep once every second after having
pressed the Arm [ ] key. The rhythm of the beeps will speed up during the last 15
seconds. After the exit delay time has elapsed, the control panel is armed.
If an exit delay has been set up for both the control panel and the keypad, the actual
delay time will be the combination of both exit delays.
This setting does not apply to the Home Mode.
Remark
Only the Exit delay can be set on the keypad. The Entry delay can be set on the control
panel (refer to the user manual of your eTIGER alarm system).
Lock / Unlock the SOS button
Lock the SOS button
1. Enter Setup mode.
2. Type [3410#].
3. You hear one beep: the setup is successful.
If the SOS button is locked, you will need to press Arm
[ ] (or Home Mode [ ]) to unlock the keypad, to type
your admin or user code, then to press [SOS] to trigger
the alarm.
Unlock the SOS button
1. Enter Setup mode.
2. Type [3411#].
3. You hear one beep: the setup is successful.
If the SOS button is unlocked, the control panel will
ring out immediately when you press Arm [ ] (or
Home Mode [ ]) and then [SOS].
Remark
Default setting: SOS button is locked.
16