eTIGER ES-K1A Manual Del Usuario página 11

EN
Register an RFID tag in the ES-K1A
1. Press Arm [ ] or Home Mode [ ] on the keypad
to unlock it.
Then type [admin code + #] to enter Setup mode.
Default admin code: 123456
If you hear 2 beeps, the code you have typed is wrong.
2. Type [41#]. You hear one beep and the LED
indicator lights up: the keypad switches to
Connection mode.
3. Swipe the RFID tag in front of the RFID reader. You
hear one beep: the connection is successful.
If you hear two beeps, the RFID tag has already been
connected.
Press [*] to exit Setup Mode.
To clear all registered RFID tags, press any of the Arm [ ] or Home Mode [ ] keys on the
keypad to unlock it, and then type [admin code+#42#]. You hear one beep: the RFID tags
have been deleted from the keypad.
11