Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1.
Unscrew the case and open it.
2.
Screw the rear cover to a door frame or to a wall.
3.
Fasten the front cover of the keypad to the rear cover and screw them together.
Remark
Because of the tamper switch, opening the rear cover of the keypad when the latter
is on triggers the alarm. In such case, stop the alarm by disarming the system, as
explained in page 12 of this manual.
8
Publicidad
Tabla de contenido
