Kit Assembly - Metra 99-7342 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
2. Attach the radio brackets to the radio
using the screws supplied with the
radio, and then secure the pocket to the
assembly using the (4) #8 x 3/8" screws
provided. (Figure A)
3. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio and climate controls for proper
operation.
4. Secure the completed assembly to the
sub-dash, and then reassemble the dash
in reverse order of disassembly, using
the 99-7342 radio trim panel.

KIT ASSEMBLY

(Figure A)
ISO DDIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure B)
2. Locate the factory wiring harness and
antenna connector in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS. Test the
radio and climate controls for proper
operation.
3. Secure the completed assembly to the
sub-dash, and then reassemble the dash
in reverse order of disassembly, using
the 99-7342 radio trim panel.
(Figure B)
REV. 5/4/2018 INST99-7342
5