Mp3 Playback Via Usb; Software Update - Blaupunkt 7 607 545 520 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
car sound system for information about
selecting these functions, e.g. in MP3
mode.
Please note that not all Bluetooth de-
vices allow a remote control or support
all functions listed.

MP3 playback via USB

You can connect a USB data carrier with
MP3 fi les with the interface to play back
the MP3 fi les via the car sound system. The
car sound system must be switched on.
Note
Always switch off the device before
connecting or disconnecting the USB
data carrier so that the data carrier is
correctly registered and unregistered.
u
Connect the USB device with the USB
cable of the interface.
u
press the SRC button on the car sound
system repeatedly until "USB" (or
the name of the connected device)
appears on the display.
Notes:
If your car sound system features a
separate USB connection, an audio
source connected to it may also
appear as "USB" on the display.
Control the playback via the car sound
system. For further details, please
read the chapter about MP3 mode in
the instructions of your Blaupunkt car
sound system.
Please note that car sound systems
with MP3 browse mode require infor-
mation about the directories of the
data carrier and the fi les stored in
them. If these data cannot be trans-
ferred quickly enough to the car
sound system, e.g. in case of a large
number of directories and fi les, the
car sound system automatically
returns to normal display from the
MP3 browse mode.

Software update

You can update the software of the interface
yourself to render the interface compatible
with newer cell phones.
Note:
If you update the software, these
operating instructions may no longer
be current. Please download a cur-
rent version of the instructions from
www.blaupunkt.de.
The following are required to update the
software:
USB data carrier (e.g. USB stick) with
FAT16 or FAT32 formatting and at least
4 MB free memory capacity
Computer with Internet access
ZIP software
Updating
u
On the USB device, create the
"Blaupunkt" directory at the top level.
Example: "W:\Blaupunkt"
u
Load the software of the Bluetooth/
USB interface from www.blaupunkt.de
and store it in a directory of your com-
puter.
u
Unzip the ZIP fi le and copy the unzip-
ped fi les to the Blaupunkt directory on
the USB device.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido