Blaupunkt 7 607 545 520 Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
u
Deactivate the USB device at the com-
puter.
u
Connect the USB device with the USB
cable of the interface.
u
Turn on the car sound system.
u
In the menu of the car sound sys-
tem, select the "CDC ON" setting (for
further details, please read the fol-
lowing chapter, "Adjusting the rear AUX
input mode").
u
Press and hold the PTT button while
switching the car sound system off and
on again.
u
Release the PTT button.
The loading process starts.
u
Select CD Changer (CDC) at the car
sound system as the audio source.
The display shows the progress of the load
process. At the same time, the title num-
bers "1" through "5" are shown in ascen-
ding order and the current time for every
title number. After the load process has
completed, the display shows the track
number "99" and the time "59:59".
Notes:
If the progress indicator stops before
the end of the loading process, dis-
connect the USB data carrier and re-
connect it to the USB cable of the in-
terface. If this is not successful, re-
peat the update process.
If the time "00:00" is displayed at the
end of the loading process, an error
occurred. In this case, repeat the up-
date process.
16
u
Select the "CDC OFF" setting in the
menu.
u
Switch the car sound system off and
on again.
The new software is now activated.
Note:
During the update, two fi les with in-
formation about the interface and
the update process are created in the
"Blaupunkt" directory of the USB data
carrier. Both fi les can be opened and
read on a computer using a plain text
editor:
The "id.txt" fi le contains information
about the status of the interface, e.g.
the current hardware and software
version as well as the Bluetooth ID
of the interface.
The "setup.log" fi le contains informa-
tion about the process of the update,
e.g. the message about a successful
installation or any errors that oc-
curred.
Adjusting the rear AUX input mode
To toggle between "CDC OFF" and "CDC
ON",
u
press the MENU•OK button of the car
sound system.
The display shows "MENU".
u
Press the
or
until "VARIOUS MENU" appears on the
display.
u
Press the button to open the menu.
u
Press the
or
until "CDC OFF" or " CDC ON" is dis-
played.
button repeatedly
button repeatedly

Publicidad

Tabla de contenido
loading

Tabla de contenido