11 UPGRADING YOUR GAUGE
Gauge firmware can be upgraded to the latest version by the user via
®
ElcoMaster , as it becomes available. ElcoMaster will inform the user
of any updates when the gauge is connected to the PC with an
internet connection.
12 WARRANTY STATEMENT
Gauges are supplied with a 12 month warranty against manufacturing
defects, excluding contamination and wear.
The warranty can be extended to two years within 60 days of purchase
via www.elcometer.com.
13 TECHNICAL SPECIFICATION
Range
Resolution
d
Accuracy
Minimum Substrate
Thickness
Gauge Memory
(Model T only)
Operating
Temperature
Power Supply
e
Battery Life
Gauge Weight
(including batteries)
Gauge Dimensions
Can be used in accordance with:
ASTM D7091, ISO 2808, ISO 19840, SSPC PA-2, US Navy NSI 009-32
d
When in test calibration mode.
e
Rechargeable batteries may differ.
www.elcometer.com
0 - 1500μm (0 - 60mils)
10µm / 1mil
(where 5µm / 0.5 mil is rounded up)
300μm (12mils)
150,000 readings in up to 2,500 batches
-10 to 50°C (14 to 122°F)
2 x AA batteries
(rechargeable batteries can also be used)
Alkaline: Approximately 16 hours
Lithium: Approximately 24 hours
156g (5.5oz)
141 x 73 x 37mm (5.55 x 2.87 x 1.46")
®
±5%
R
en-14