GM 88967579 Guia De Inicio Rapido

Mirror Covers
Kit Contents
Driver Side Mirror Cover
Passenger Side Mirror Cover
Installation Instructions
Tools Required:
Flat Bladed Tool
Removal of Existing Mirror Cover
1. Locate edge of mirror cover in relation to mirror housing and
mirror face. See Figures 1A & 2A.
FIGURE 1A
MIRROR COVER
Z
Y
X
FIGURE 2A
MIRROR COVER
Z
Y
X
Mirror Cover
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 03JA06 I
WHITE 16 POUND NON-BOND
15AU06 R
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
Quantity
1
1
1
MIRROR HOUSING
MIRROR FACE
REVISION
2. Using a flat bladed tool and piece of cardboard or other
material to minimize the local connect on the mirror housing
carefully pry the mirror cover from the mirror housing.
NOTE: CARE SHOULD BE TAKEN NOT TO DAMAGE THE
GRAIN ON THE MIRROR HOUSING.
Installation of New Mirror Cover
1. Remove any residue from the mirror housing.
2. Place new mirror cover into position and check for correct
fit. See Figure 3A.
FIGURE 3A – Mirror Housing w/o Mirror Cover
3. Place tabs from mirror cover through the holes on the mirror
housing and snap into place.
4. Repeat same procedure for opposite side mirror cover.
IR 03JA06
PART NO.
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
PART NO.
88967579
6200 Grand Pointe Dr., Grand Blanc, MI 48439
MIRROR FACE
MIRROR HOUSING
88967579
SHEET
Mirror Cover
1
SHEET
1
3
OF
3
OF