GM 88961527 Guia De Inicio Rapido

Full Size Van Window Guards - Screens
Application
These window guards (screens) to fit all GMC or Chevrolet cargo vans 1997 or newer.
12498971
12498713
12498714
12498715
Recommended Tools
7/16" Wrench, Socket, or Nut Driver
Drill Motor
1/8" and 3/16" Drill Bits
Installation Instructions
Begin by verifying that the window guards (screens) agree with your application.
1. Push screen inside window opening.
2. While holding the screen firmly in the window opening, mark through each top attachment loop.
3. Drill a 1/8" pilot hole at each mark then drill out each 1/8" pilot hole to 3/16".
4. Attach screen to the window opening using #14 x 1" sheet metal screws.
5. Press the screen against the inside bottom of the window opening and mark through each bottom attachment
loop.
Note: Sliding side door screens do not have bottom loops, skip to Step 7.
6. Repeat Steps 3 and 4.
7. Press each side of the screen against the window opening and mark through each side attachment loop.
8. Repeat Steps 3 and 4 to complete the installation.
9. Repeat Steps 1 through 8 for other door.
Window Guards - Screens
ALL INFORMATION WITHIN ABOVE
DATE
BORDER TO BE PRINTED EX-
ACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GMSPO SPECIFICATIONS.
Right Hand Sliding Door Window Screen Kit
Right Hand Split Door Window Screen Kit
Left Hand Split Door Window Screen Kit
Rear Door Window Screen Kit
REVISION
088961527
PART NO.
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
Window Guards - Screens
PART NO.
88961527
6200 Grand Pointe Dr., Grand Blanc, MI 48439
88961527
SHEET
1
SHEET
1
3
OF
3
OF