Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Chromed Outside Door Handles
Kit Contents
Description
Front Driver Side Handle w/ lock cylinder provision .................. 1
Front Passenger Side Handle ....................................................1
Rear Driver Side Handle ...........................................................1
Rear Passenger Side Handle ...................................................1
Installation Instructions .............................................................1
Door Latch Rod Clips .................................................................2 or 4
Required Tools
Flat bladed tools
‡
Panel Trim Removal Tool: Plastic, Vinyl or Nylon Knife
‡
Door Trim Fastener Removal Tool
Ratchet with 10 mm socket and 6 inch extension
Pencil Magnet
Torque Wrench
8 mm / 5/16" Box Wrench or Socket
Before You Start:
‡
Read all instructions prior to starting.
‡
This document has been written to allow the installer to
disassemble the doors as needed to install the chromed handles.
Follow the instructions in the reverse order to complete the
reassembly of the doors.
‡
NOTICE: Use the correct fastener in the correct location.
Replacement fasteners must be the correct GM part number for
that application. Do not use thread locking compound or sealant.
Do not use paints, lubricants, or corrosion inhibitors on fasteners
or fastener joint surfaces. These coatings affect fastener torque
and joint clamping force and may damage the fastener. Use the
FRUUHFW WLJKWHQLQJ VSHFL¿FDWLRQV ZKHQ LQVWDOOLQJ IDVWHQHUV LQ RUGHU
to avoid damage to parts and systems.
‡
HANDLE POSITIONS
‡‡ )5217 +$1'/(6 7KH IURQW KDQGOHV DUH VWDPSHG ZLWK WKH
door position on the end of the handle's lever extension next to
the plastic grommet. The positions are noted as Frt L (Front Left),
)UW 5 )URQW 5LJKW 7KH VLQJOH GLJLW VXI¿[ QH[W WR WKH SRVLWLRQ
stamp is for manufacturing purposes only .
‡‡ 5($5 +$1'/(6 7KH UHDU KDQGOHV DUH VWDPSHG ZLWK WKH GRRU
position on the side of the handle's lever extension. The positions
are noted as L-Rear (Left Rear) and R-Rear (Right Rear). See
examples below.
‡‡ 127( The front door handles have a shorter lever extension
than that of the rear door handles.
Chromed Outside Door Handles
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
Quantity
AUTH
DR
REVISION
1735343
Upper Extension Trim Panel - Front Doors
1. Open the front door to remove the upper extension trim panel.
2. NOTE : This panel may or may not be attached to the door trim
panel. Remove or release the upper extension (1) from the trim
panel by pulling outward on the front edge to release the clips
(2).
88968297
PART NO.
REV 22JN12
INSTALLATION INSTRUCTIONS
TITLE
Chromed Outside Door Handles
PART NO.
88968297
6200 Grand Pointe Dr., Grand Blanc, MI 48439
L-FRT
LEVER EXTENSION
L-REAR
1
SHEET
OF
1
18
SHEET
OF
18
Publicidad
Manuales relacionados para GM 88968297
Resumen de contenidos para GM 88968297
- Página 1 ‡ NOTICE: Use the correct fastener in the correct location. Replacement fasteners must be the correct GM part number for that application. Do not use thread locking compound or sealant. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces.
- Página 2 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 3 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 4 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 5 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 6 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 7 AVIS : Utiliser la bonne fixation au bon endroit. Les pièces GH ¿[DWLRQ GH UHFKDQJH GRLYHQW FRPSRUWHU OH ERQ QXPpUR GH pièce GM pour cette application. Ne pas utiliser de composé IUHLQ¿OHW RX GH SURGXLW G pWDQFKpLWp 1H SDV XWLOLVHU GH SHLQWXUH GH OXEUL¿DQW RX G LQKLELWHXU GH FRUURVLRQ VXU OHV SLqFHV GH ¿[DWLRQ RX...
- Página 8 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 9 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 10 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 11 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 12 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 13 AVISO: Use el sujetador correcto en la ubicación correcta. /RV VXMHWDGRUHV GH UHHPSOD]R GHEHQ VHU HO Q~PHUR GH SDUWH GM correcto para esa aplicación. No use compuesto o sellador de bloqueo de rosca. No use pinturas, lubricantes o inhibidores de corrosión sobre sujetadores o superficies de unión del sujetador.
- Página 14 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 15 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 16 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 17 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.
- Página 18 ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8.5 x 11 Chromed Outside Door Handles WHITE 16 POUND NON-BOND RECYCLABLE PAPER. PRINT ON BOTH SIDES, EXCLUD- ING TEMPLATES. PART NO. 88968297 TO BE UNITIZED IN ACCORDANCE SHEET WITH GM SPECIFICATIONS.