Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Smoker's Package
Package Contents
Description
Ashtray
Cigarette Lighter
Cigarette Lighter Housing Retainer
Cigarette Lighter Housing
Instruction Sheet
Tools Required
J 42059 Cigarette Lighter Socket Remover
Installation Instructions:
1. Open front console extension door and remove bin from
console.
2. Install Ashtray into console extension.
3. Install Cigarette Lighter Housing per instructions below.
APO Removal Procedure
1. The ignition key must be off or in lock position.
2. Disconnect the negative battery cable.
3. Disconnect the positive battery cable.
4. Insert the J 42059 into the APO socket sleeve. Tilt the tool so
that the tool fits into the slots on the sides of the APO socket
sleeve.
Smoker's Package
ALL INFORMATION WITHIN ABOVE
DATE
BORDER TO BE PRINTED EX-
ACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GMSPO SPECIFICATIONS.
Quantity
1
1
1
1
1
REVISION
06DE05
5. Hold the plastic ring in place. Pull the APO socket out of the
assembly in order to remove the outlet.
6.
Remove the plastic ring.
7. If J 42059 tool fails to release the power port/lighter socket
from the retainer, perform the following alternate method:
A. Insert a small grinding tool with a cutoff wheel into the
socket.
B. Remove the plastic latches in the 3 mm (0.11in) square
windows.
C. Use the J 42059 as directed above to remove the socket.
8. Remove the electrical connector from the APO socket.
Cigarette Lighter Installation Procedure
1. Insert the plastic ring into the opening in the trim and snap the
plastic ring into place.
2. Connect the electrical connector to the cigarette lighter
housing.
3. Insert the housing through the plastic ring gently by hand until
the socket ring is sealed.
4. Install the power supply fuse.
5. Insert the cigarette lighter into cigarette lighter housing.
6. Connect the positive battery cable.
7. Connect the negative battery cable.
IR 06DE05
PART NO.
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
PART NO.
88967503
6200 Grand Pointe Dr., Grand Blanc, MI 48439
88967503
SHEET
Smoker's Package
SHEET
1
3
OF
3
1
OF
Publicidad
Manuales relacionados para GM 88967503
Resumen de contenidos para GM 88967503
- Página 1 7. Connect the negative battery cable. 4. Insert the J 42059 into the APO socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the APO socket sleeve. 88967503 Smoker's Package IR 06DE05 PART NO.
- Página 2 4. Insérer le J 42059 dans le manchon de la douille de prise de courant auxiliaire. Incliner l’outil de manière à ce qu’il s’insère dans les fentes latérales du manchon de douille de la prise de courant auxiliaire. 88967503 Smoker's Package IR 06DE05 PART NO.
- Página 3 4. Inserte la herramienta J 42059 en la manga del receptáculo del tomacorriente auxiliar. Incline la herramienta de modo que encaje dentro de las ranuras en los costados de la manga del receptáculo del tomacorriente. 88967503 Smoker's Package IR 06DE05 PART NO.