Publicidad
Idiomas disponibles
Idiomas disponibles
P74085ea_F5U103-F5U109ea.qxd
USB PDA Adapter (Belkin Part Number: F5U109)
USB Serial Adapter (Belkin Part Number: F5U103)
Please make sure you have the latest version of the Palm
software. Go to http://www.palm.com for current updates.
Suggested settings for the Palm HotSync
1. You can access the HotSync Manager by clicking on the red
and blue HotSync icon on your System Tray in the lower
right corner of your desktop next to the time. If your
HotSync icon doesn't show up in your System Tray, you can
go to "Start", "Programs", "Palm Desktop", and then
"HotSync Manager". The icon will now appear on your
System Tray.
2. In the menu of the HotSync icon on your taskbar, be sure to
choose "Local Serial" and not "Local USB". If you only have
"Local" as an option, just choose "Local". Click "Setup"
and click on the "Local" tab.
3. Make sure the COM port shows the same COM port as the
one assigned to the Belkin adapter (this can be found in
the Device Manager).
4. Set the speed to 19200kps. (If your PDA doesn't connect at
this speed, try lowering the speed to 9600kps.)
Please make sure that the internal modem and the Belkin
adapter are not sharing the same COM port.
To find out what COM port your internal modem is
assigned to:
For Windows
1. Click "Start", "Settings", and then "Control Panel".
2. Double-click on "Modems".
3. Click on the "Diagnostics" tab to see what COM port is
assigned to the modem.
03-09-2002
ADDENDUM
Troubleshooting Tips
®
98, 98 SE, or Me:
1
11:59
Page 1
™
®
Manager:
En
Publicidad
