What You Need; What's Included - Cooper Lighting RFM182 Instrucciones

RFM182_W 825-0255.qxd:Layout 1 11/13/08 10:08 AM Page 2
English
RFM182
RFM182W
Congratulations. You have just purchased a digital wireless lighting system. The
floodlight with motion sensor contains a radio frequency (RF) transmitter that can be
mounted to a standard junction box. The twin par remote floodlight contains a RF
receiver and can be mounted to a standard junction box. The floodlight with sensor
detects motion and turns ON lights, then sends a signal to the receiver, which turns
ON the remote light.

WHAT YOU NEED

• Phillips screwdriver
• Electric drill
• 1/8˝ drill bit
• Outdoor weatherproof silicone caulking
• (4) 150 watt (max.) PAR 38 flood light bulbs
Note: This fixture was designed to work with up to 150 watt maximum PAR halogen
flood bulbs. For improved energy efficiency, lower wattage PAR halogen flood bulbs
may be used. Compact Fluorescent (CFL) bulbs contain electronics which may
interfere with the motion sensing functions of your fixtures and are not
recommended.

WHAT'S INCLUDED

• Motion detector/transmitter and
light fixture (A)
• Lampholder gaskets (B)
B C
• (2) Lamp covers (C)
• Light fixture (receiver) (D)
A
• Coverplate gaskets (E)
• Mounting bracket (F)
D E
• Mounting screws (G)
• Wire nuts (H)
• Color matched center hold plug (I)
• Center bolt (J)
J
F G H I
WHAT TO KNOW
• For outdoor use only.
• cULus Listed for wet location use.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other connection
voids warranty.
WARNING: Risk of fire/electric shock. This motion activated floodlight
system, should be installed by persons with experience in household
wiring or by a qualified electrician. The electrical system and the
Call for customer service and/or missing or damaged parts (800-334-6871)
2