Descargar Imprimir esta página

LG GSX961NSAZ Manual Del Propietário página 43

Ocultar thumbs Ver también para GSX961NSAZ:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 289
Symptoms
There is no
refrigeration or
freezing.
There is poor
refrigeration or
freezing.
The appliance
contains a bad smell.
The inside lamp in the
appliance does not
turn on.
Frosts has formed
in the freezer
compartment.
Reason
Is there a power interruption?
If the power plug unplugged
from the outlet?
Is the fridge or freezer
temperature set to its warmest
setting?
Is the appliance in direct
sunlight, or is it near a heat
generating object such as
cooking oven or heater?
Did you store hot food without
cooling it first?
Did you put in too much food?
Are the appliance doors
completely closed?
Is there enough space around
the appliance?
Is the fridge or freezer
temperature set to 'Warm'?
Did you put in food with a
strong smell?
Vegetables or fruit may have
spoiled in the drawer?
Does the inside lamp in the
appliance turn off?
Is the air entry or exit of the
freezer compartment blocked?
Solution
• Check the power of other appliances.
• Plug the power plug in the outlet
properly.
• Set the fridge or freezer temperature
to 'Medium'.
• Check the installation area and
reinstall it away from heat generating
objects.
• Cool the hot food first before putting it
in the fridge or freezer compartment.
• Maintain an appropriate space
between food.
• Completely close the door and
make sure that stored food is not
obstructing in the door.
• Adjust the installation position to
make enough space around the
appliance.
• Set the fridge or freezer temperature
to 'Medium'.
• Store foods with strong smells in a
sealed containers.
• Throw away rotten vegetables and
clean the vegetable drawer. Do not
store vegetables too long in the
vegetable drawer.
• It is hard for customers to replace the
inside lamp in the appliance as they
are not serviceable. If the inside lamp
does not turn on, please contact the
LG Electronics customer information
centre.
• Make sure that air entry or exit is not
blocked so that the air can circulate
inside.
EN
43

Publicidad

loading