Rear Panel; Connecting Sensor Or Cable - Henry Schein Nellcor 900-8273 Instrucciones De Uso

Button Combination
When the oximeter is off, synchronously press the On/Off button
and the Function button for one second, the oximeter will enter
Data transfer state.

2.2.3 Rear Panel

Figure 2-5 Rear Panel

2.3 Connecting Sensor or Cable

Figure 2-6 Sensor and Cable Connecting Port
SpO Sensor and cable port is at the top of the oximeter. An
2
extension cable can be used between the oximeter and the SpO
2
sensor. Use only the cable permitted by the manufacturer.
20