System Menu - Henry Schein Nellcor 900-8273 Instrucciones De Uso


Connect the oximeter and the computer with a cable for the
communication between the oximeter and the Oximeter
Viewer Data Management Software;

Synchronously press the On/Off button and the Function
button, after POST, the oximeter enters Data Transfer State
automatically. The interface displays as below:

3.3 System Menu

Press the Function button to see the following main menu of the
oximeter, select items by pressing the Up/Down button, and
confirm it by pressing the Function button.
System Setup >>:
Figure 3-5 Data Transfer State
29