2.12 Channel Data Modelling - MasterCool ULTIMA ID PRO 2 Manual Del Usuario

2.12 Channel Data Modelling

Channel Data Modelling is a unique feature to the Ultima ID Pro™. It allows the user to test
refrigerants that the analyzer may not already identify and "fingerprint" the data using the
available channels. The channel data is available for Identified and "Unknown Refrigerants."
Once you complete a test on an Identified Refrigerant (see list in section 2.8 Pure
Refrigerants) or "Unknown Refrigerants", the test results will display similar to (Figure 25)
for Identified Refrigerants or (Figure 25a) for "Unknown Refrigerants." Once displayed, the
analyzer will allow the user to print. Press the 'PRINT' button and the data will appear on the
printout like (Figure 26).
This new feature allows the user to develop a "fingerprint" model for different refrigerants the
Ultima ID Pro™ may not already analyze. If the user tests a virgin tank of refrigerant at least
3 times and receives Channel Data that is consistent or within a close range to one another,
this data can be used as a "fingerprint" model of that particular refrigerant. This feature will
allow the user to have a guide to identify refrigerants not already established by the analyzer
and increases the capabilities of the Ultima ID Pro™.
R1234yf
NOTE:
This is not a guaranteed method for identifying refrigerants. Results will vary and
some refrigerants may create inconsistent data.
Manual Part Number:
5-06-7000-70-2
0.0% AIR
REFRIGERANT
PURITY UNKNOWN
PRINT DONE
Figure 25
0.0% AIR
UNKNOWN
REFRIGERANT
PRINT DONE
Figure 25a
Mastercool Inc
Refrigerant
Analyzer
R1234yf
Purity Unknown
Channel Data
F01:
F02:
F03:
F04:
F05:
F06:
F07:
F08:
F09:
F10:
F11:
F12:
Figure 26
Manual File:
MN-A-0289 Rev. E
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
#.#
Page 2-22