Publicidad
Idiomas disponibles
Idiomas disponibles
®
3.
Place each plate onto underside of worksurface and
align with pilot holes (3a). Attach each plate to worksurface
by first fastening two (2) #10 x 1-1/16" wood screws into the
pilot holes (3b). Insert ten (10) #10 x 1-1/16" wood screws
into remaining holes (3c).
NOTE: Protect top surface from scratches while working.
4.
Place each control lever bracket onto underside of
worksurface and align with pilot holes (4a). Mount each
bracket with two (2) #10 x 1-1/16" wood screws (4b). On 24" x 36"
table, cross control lever cables over each other (4c).
RISK OF INJURY. The correct location of leg
mounting plates and control levers is critical to
the safe functioning of the table.
3b
3c
4b
A
PILOT HOLE LOCATIONS
B
3a
B
4.125
3.875
C
D
E
Wksf
A
Depth
24"
11.23
30"
8.375
4c
24" x 36" TABLE
A
B
4a
4.125
3.875
C
D
E
B
C
D
E
7.2
8.73
19.0
20.0
10.2
5.875
14.75
15.75
3b
3c
Page 2 of 30
939501618 Rev U
Wksf
Depth
B
Publicidad
