Strong SRT 6015 Manual Del Usuario página 9

UM 6005-15 ENG 1/26/06
PART 1 English
4. VCR SCART Connector
To connect your receiver to your video recorder using a scart cable. Your video signal will now
be looped through your receiver to your TV set.
5. RS-232 Serial Port
This serial port can be used to connect your PC with your receiver, to download new versions
of software to your receiver.
6. S/PDIF Digital audio output
Use this coaxial output to connect your receiver to the input of your digital audio amplifier.
7. Power ON/OFF Switch
8. Power Cord
Your receiver requires a current of 90 ~ 240 V AC (Auto-selectable), 50 ~ 60 Hz +/- 5 %.
Make sure to check the power specification before connecting your receiver to the wall outlet.
9. RF OUT Incl. modulator
RF Modulator output (male part). If you do not use a scart cable to connect your receiver to
your TV, or if you have connected a cable to the ANT input, you will have to use this connector
to connect the receiver to your TV by using a coaxial cable. You can also use this connector to
connect a second TV set to your receiver.
10. ANT IN 2
Input Antenna (female part). If you have cable TV or if you have an outdoor antenna, then you
can connect the RF cable coming from the antenna or wall connector to this ANT input.
2
11. S-VHS
Use this connector to connect your receiver to your TV or VCR using S-Video cable for better
picture quality.
1 Only for model SRT 6010 and 6015
2
Only for model SRT 6015
4:18 PM Page 9
1
1
2
9