Beko DP 207 Manual De Instalación página 5

Further safety instructions:
• Also the applicable national regulations and safety instructions have to be observed during installation
and operation.
• DP 207 is not allowed to be used in explosive areas.
Additional remarks:
• Do not overheat the instrument!
• In case of mounting by screwing please use spanner flat (SW27)!
• DP 207 is not allowed to be disassembled!
Attantion !
Malfunctions at DP 207
Faulty installation and insufficient maintenance may lead to malfunctions at DP 207
which may affect the measuring results and which may lead to misinterpretations.
r
Measures :
Let compressed air flow off at the sampling point before measurement in order to remove condensate and
particles. This avoids a soiling of DP 207 and the measuring chamber.
Stagnant air leads to long adjustment times.
DP 207
Safety instructions
5