Technical Data - Beko DP 207 Manual De Instalación

3

Technical data

Measuring ranges
Pressure range
Connection measuring chamber
Purge air requirement
Display
Display functions
Outputs
Input
Weight (without meas. chamber)
Protection class
Accuracy
Current supply
Continuous operation
Power supply unit
Operating temperature
EMV
Screw-in thread
Housing material
DP 207
-112... 122°F td
-4... 158°F
0... 100 % RH
Upon customer request further parameters can be programmed by
BEKO TECHNOLOGIES ppmV/V, atmospheric dew point, g/m³,
mg/m³, g/kg, or °C
Mounting without measuring chamber: -14,5 to 725 psi (standard)
Mounting with measuring chamber:
Internal thread G½" / G¼"
Plug nipple NW 7,2; G¼" external, for quick-lock coupling.
16 l/min when using the measuring chamber (for 100psi / 7 bar)
Single-line, resolution 0.1
Dew point (°F td)
Relative humidity (% RH)
Temperature (°C or °F), according to factory setting
Maximum 3 parameters can be chosen one after the other by means of
the scroll function "arrow down"
Min., Max., battery condition
Serial data interface (SDI) for PC Software
Load of rechargeable battery only possible with power supply unit
0.75 lb (340 g)
IP 65
± 0,9°F td (14... 122°F td)
typical ± 3,6 °F td at -40°F td
Internal rech. batteries (4 x 1.5 NiMh AAA) for approx. 15 h operation
Indication "Low Bat." Max 2 h, remaining operation time
Charging time: Max. 2 h
Continuous operation with power supply unit
100 – 240 VAC – 50/ 60 Hz, 0.2 A,
24 VDC – 300 mA
Safety class 2, only for application in dry rooms
-4... 158°F measuring gas temperature
0... 122°F ambient temperature
DIN EN 61326
G½" stainless steel
Polycarbonate
Technical data
0 to 232 psi (0 to 16 bar)
7