Heating Phase - Faema E98/A-1 Compact Manual De Instrucciones

English
Setting at work - 1 dispenser unit machines
Machines connected to the main water supply
" Before using the machine make sure that:
the main electricity supply ON/OFF switch is ON;
!
the main water supply tap is open. "
Turn the main ON/OFF switch (4) to position 1. The "machine ON"
indicator light (18) lights up.
If the water level in the tank is below the minimum level, the "tank
level" indicator light (11) lights up, the tank is automatically topped up
to the optimal level, and the indicator light (11) switches off.
At the end of this operation, the water level in the boiler is checked.
If the level is below the minimum, the "boiler level" indicator light (12)
lights up, and the boiler is filled up to the optimal level (indicator light 12
off).
"Heating" now begins.
At the end of the day, turn the machine OFF by turning the main ON/OFF switch (4) to position 0.
Setting at work - 2 dispenser unit machines
"Before using the machine make sure that:
!
the main electricity supply ON/OFF switch is ON;
the main water supply tap is open. "
At the end of the day, turn the machine OFF by turning the main ON/OFF switch (4) to position 0.
Gas lighting (2 dispenser unit + GAS machines only)
" Don't light the gas when the boiler is at working
!
pressure. "
Before switching on the machine, check that:
- The main electric power switch is on.
- The water tap is open.
- The gas tap is open.
Press and rotate the knob of tap (27) towards the left to position B, and
keep pressed for about 30 seconds. Check that window (28) is open
and after a few seconds release knob (27).
"Heating" now begins.

Heating phase

During heating, if one of the coffee dispensing push buttons (13, 14,
15, 16 or 21) is pressed, the machine dispenses a coffee at the tem-
perature reached at the time.
The hot water dispensing push button (19) is deactivated until the working
pressure is reached.
Heating is completed when the "machine at working temperature" indi-
cator light (17) lights up (for machines with 1 dispenser unit only)
and the boiler gauge indicator (3) remains stable in the green area.
Machines not connected to the main water supply
" Before using the machine make sure that:
the main electricity supply ON/OFF switch is ON;
!
the water in the tank is at the maximum level. "
Turn the main ON/OFF switch (4) to position 1. The "machine ON"
indicator light (18) lights up.
If the water level in the tank is below the minimum level, the "tank
level" indicator light (11) lights up, and the tank should be filled up to
the optimal level using a jug. On completion, the indicator light (11)
switches off.
At the end of this operation, the level of the water in the boiler is checked.
If the level is below the minimum, the "boiler level" indicator light (12)
lights up, and the boiler is filled up to the optimal level (indicator light 12
off).
"Heating" now begins.
Turn the main ON/OFF switch (4) to position 1. The "machine ON"
indicator light (18) lights up.
If the water level in the boiler is below the minimum level, the "boiler level"
indicator light (12) lights up, and the boiler is filled up to the optimal level
(indicator light 12 off).
Turn the main ON/OFF switch (4) to position 2.
"Heating" now begins.
27
The machine is now ready to dispense coffee, milk, cappuccino, steam
and hot water.
To make sure the dispenser unit and the filter holder (7) are at similar
temperatures, turn press the START-STOP push button (21) and let
the machine dispense for a few seconds. Then press the push button
(21) again.
English
B