Tabla de contenido
Publicidad
English
Daily Switch-On
"Before switching on the machine, ensure the
! ! ! ! !
following:
The mains switch is on.
The water mains tap is open".
Turn the master switch (1) to position 1. The indicator light
"machine on" (5) switches on.
If the water level in the boiler is less than the minimum
required, the boiler is filled up to the correct level.
Turn the master switch (1) to position 2.
"Heating" now begins.
At the end of the day, turn the machine OFF by turning the
main ON/OFF switch (1) to position 0.
Cup-Warmer (when provided)
Place only coffee cups, cups and glasses to be used in
conjunction with the coffee machine on the cup-warming
plate.
Ensure that the coffee cups are completely drained before
placing them on the cup-warming plate.
No other objects shall be placed on the cup-warming plate
(11).
Press the button (12) and check to see that the light turns on.
Heating phase
During heating, if one of the coffee dispensing push buttons
is pressed, the machine dispenses a coffee at the
temperature reached at the time.
Heating is completed when the boiler gauge indicator (14)
remains stable in the green area.
The machine is now ready to dispense coffee, steam and
hot water.
To make sure that the dispenser unit and the filter holder
(10) are at similar temperatures, press the coffee dispensing
push button (18) and let the machine dispense coffee for a
few seconds. Then press again the push button (18) to stop
dispensing.
All manuals and user guides at all-guides.com
30
5
1
11
12
18
18
10
14
English
10
Publicidad
Tabla de contenido
