Publicidad
7.
Affix new label to door. Cover the old label if it exists.
Placer une nouvelle étiquette sur la porte. Recouvrir l'ancienne étiquette au besoin.
Coloque la nueva etiqueta sobre la puerta. Cubra la etiqueta vieja si existe.
DO NOT REMOVE
SAFETY CLIP
1.This screw adjusts the door in the
horizontal, or "b", direction.
2.This screw adjusts the door in the
vertical, or "c", direction.
3.This screw adjusts the door in the
front-to-back (depth), or "a", direction.
* When door drags, scrapes, is visually not aligned, hard
to operate, etc., contact your authorized Steelcase
dealer or internal maintenance department immediately.
PRINTED IN USA
Assembly Directions
93-9504549 REV A
STORAGE TOWER HINGE ADJUSTMENT
(WHEN DOOR DOES NOT POCKET PROPERLY
note 3
note 1
IMPORTANT
Failure to do so could result in injury.
*
)
note 2
93-9503127 rev A
Page
6 of 6
Publicidad
