Nice OVBT Instrucciones Y Advertencias Para La Instalación Y El Uso página 15

6.3 – "SYSTEMS" Area
This area is a filing system which enables the creation and storage, for
each system, of an analytical datasheet containing the client's personal
data and settings of the devices installed in the relative system. More
specifically it enables modifications to systems, display of codes, set-
tings and storage of data regarding devices installed. Data storage en-
ables settings to be restored with ease, in the event of a device fault or
malfunction.
This area comprises two windows:
– one used for the selection of stored systems, using the quick search
function;
– another for storing all data related to a single system.
To access the "Systems" area, proceed as follows:
01. In the Home page (fig. 4) click on the icon "Systems".
02. An initial window is displayed (fig. 13) for management of stored
systems made of the following elements:
• The area "Search filter" which enables a simple and quick search
for stored systems. Enter the name of the client, the city and click
on "Find"
13
• The area "Systems List" showing all previously stored systems.
• The browser bar, at the bottom, with the following items:
– "New system": enables the creation of a new system
– "Copy": enables the user to copy data from an existing system
to create a new identical version.
– "Delete": enables the user to delete one or more systems.
– "Back": enables the user to return to the previous window.
03. To perform these tasks, proceed as follows:
❑ To open an existing system, select it in the list (using the "search"
filter if required) and double click on it.
❑ To create a new datasheet for storing data of a system, click di-
rectly on the key "New system".
❑ To create a new datasheet containing the data of an existing
datasheet/system, select the required datasheet and press "Copy".
❑ To delete one or more stored datasheets, select the required da-
tasheet and press "Delete".
Depending on the selected function, the software opens a second
window with the datasheet of the selected system. In this window,
the "Systems" area contains the data on the system and the "De-
vices" area contains the icons related all devices belonging to this
system.
The browser bar in this window contains the following items:
– "Remove from system": enables deletion of a selected device
from the datasheet;
– "Display configuration": enables the display of all parameters
used to configure the device;
- "Work on system": enables work on a new or existing system
(refer to paragraph 6.3.1);
- "Load from file": enables reading of data from a device file;
– "Save": enables the user to save modifications applied to a sys-
tem datasheet;
– "Back": used to return to the previous page.
6.3.1 – Adding devices to a datasheet/system
In general, to add one or more devices on a system datasheet, there are
two optional procedures:
English – 13