Advanced Functions - Thrustmaster DUAL TRIGGER 2-IN-1 Manual Del Usuario

INSTALLATION ON PC
System requirements: PC (Windows 98 and higher) equipped with USB port.
1. Connect the USB connector to one of your computer's USB ports. Windows 98/Me/2000/XP will
automatically detect the new device. (If you are connecting a USB device for the first time, Windows
may ask you to insert the Windows CD-ROM during the installation procedure in order to install the
required system files.).
Windows 98: the Add New Hardware Wizard will search for the appropriate drivers. Click Next.
Follow the on-screen instructions to complete the installation.
Windows Me/2000/XP: the drivers are installed automatically.
2. Select Start/Settings/Control Panel, then double-click Game Controllers (or Gaming Options,
depending on your operating system). The Game Controllers dialog box displays the gamepad's
name with OK status.
INSTALLATION ON PS2
1. Plug the gameport connector on the PS2 / PC cable (10) into a controller port on your console.
2. Turn on your console and start up your game.
You are now ready to play!

ADVANCED FUNCTIONS

• MODE button (6): press this button to switch between modes.
- Analog mode (default on PS2 and PC): MODE button (6) lights up blue.
- Digital mode: MODE button (6) is not lit up.
• TURBO button (8): allows you to repeat an action continuously (does not work with mini-sticks or
START + SELECT buttons).
- Simultaneously press the TURBO button (8) + the button whose action you want to repeat. The
MODE LED turns red. Turbo mode is now enabled.
- To disable Turbo mode, repeat this procedure. The MODE LED turns off. Turbo mode is now
disabled.
TRIGGER MAPPING
All analog buttons (on PS2) or digital buttons (on PC) and mini-stick directions (axes) can be mapped to
the left and right triggers (except D-Pad and START, SELECT, L3 and R3 buttons).
• MAPPING button (7) (used to map left and right triggers):
- Press and release the MAPPING button (LED flashes slowly).
- Press and release the button or direction you want to assign to the trigger (LED flashes quickly).
- Press and release the trigger assigned to this function (LED turns off).
• EEPROM:
Your gamepad includes an internal memory chip, which stores your last mapping configuration even if you
turn your gamepad off.
2/4