Franklin Electric Co., Inc.
P. O. Box 12010
Oklahoma City, OK 73157-2010
405.947.2511 • Fax: 405.947.8720
www.LittleGiantPump.com
CustomerService-WTS@fele.com
BEFORE INSTALLING PUMP, BE SURE TO READ THIS
OWNER'S MANUAL CAREFULLY.
Fill the pump with water before starting or the
C A U T I O N
pump will be damaged. The motor on this pump is guaranteed
by the manufacturer, and in the event of failure it must be
returned to an authorized service station for repairs. The motor
warranty is void if repairs are not made by an authorized repair
station.
INSPECT THE SHIPMENT
Examine the pump when it is received to be sure there has
been no damage in shipping. Should any be evident, report it
immediately to the dealer from whom the pump was purchased.
Please check the pump package to see that it includes pump,
motor, and motor leads (if your pump purchase includes a
motor).
This pump includes either a built-in or externally-mounted
check valve with the discharge head. Make certain that your
available voltage corresponds to that of your motor.
4" SUBMERSIBLE PUMP
OWNER'S MANUAL
READ AND FOLLOW SAFETY INSTRUCTIONS
This is the safety alert symbol. When you see this
symbol on your pump or in this manual, look for one of
the following signal words and be alert to the potential for
personal injury:
D A N G E R
personal injury, death, or major property damage if ignored.
W A R N I N G
personal injury, death, or major property damage if ignored.
C A U T I O N
minor personal injury or major property damage if ignored.
The label NOTICE indicates special instructions, which are
important but not related to hazards.
Carefully read and follow all safety instructions in this
manual and on pump.
Keep safety labels in good condition.
Replace missing or damaged safety labels.
WA R N I N G
Hazardous voltage.
Can shock, burn, or
cause death.
Ground pump before
connecting to power
supply. Disconnect
power before working
on pump, motor
or tank.
warns about hazards that will cause serious
warns about hazards that can cause serious
warns about hazards that will or can cause
Wire motor for correct voltage.
See
Electrical
section of this manual and motor
nameplate.
Ground motor before connecting
to power supply.
Meet National Electrical Code,
Canadian Electrical Code, and
local codes for all wiring.
Follow wiring instructions in
this manual when connecting
motor to power lines.
Information
1