Sinbo SVC 3467 Manual Del Usuario página 11

2. Assembling the telescope tube and accessories
2.1: Fit the telescopic tube into the other end of the hose.
2.2: Adjust th e length of the telescopic tube by pushing the locking
mechanism down and pulling in the bottom section of the tube
to a suitable length.
When parking, shorten the tube as far as possible.
2.3: Fit the floor brush into the telescope tube.
Floor Nozzle
The floor nozzle has two settings. When cleaning hard
surfaces(parquet flooring, flooring tiles, etc.), the nozzle
brushes should be extended. When cleaning carpets
and mats, the brushes should be retracted into the
nozzle. Press the brush change button to switch
between the two settings.
Joint nozzle
For radiators, corners, skirtings, etc.
Furniture nozzle
For furniture, curtains, drapes, etc.
USE
Vacuum cleaning
1. Before using the device first roll out a sufficient length of electric
flex cable and plug into the mains socket. The yellow mark on the
electric flex cable is the maximum length that must not be exceeded.
To switch on the device press the foot pedal button
with your foot
on the casing
- 10 -