Intended Use; Identification Plate - MTD GT40 Manual De Instrucciones

Safety information
¾ Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied fitting instructions, remove
the power pack in advance.
¾ Repairs must only be performed by a qualified
technician or service centre.
¾ This trimmer is intended for the care of lawn
edges and smaller grass and lawn areas in
private households. The device must not be
used for purposes other than those intended
because of the risk of bodily injury to the user or
other persons.

Intended use

The trimmer with inserted line spool is intended
solely for the care of lawn edges and smaller grass
and lawn areas in private households.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Incorrect/abnormal use
This trimmer should not be used in public facilities,
parks, sports grounds, roads etc. nor in agriculture
or forestry.
To prevent bodily injury to the user, the trimmer must
not be used to cut thicker branches or for shredding
for the purpose of composting.

Identification plate

Position
The identification plate is located on the trimmer
casing.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Safety information
¾ Only use the trimmer in daylight or under
bright artificial light. Keep your work area clean
and well lit.
¾ Only use the trimmer in dry weather condi-
tions. Keep the device away from rain or damp
and do not use it during a storm. The ingress of
water into the trimmer increases the risk of an
electric shock.
¾ Even if all safety and operating instructions
are heeded, there is always a residual risk of
injury and property damage. Always be con-
scious of this!
Layout
1 Engine speed in rpm
2 Power
3 CE mark
4 Disposal instruction
5 Guaranteed sound level
6 Year of manufacture
7 Degree of protection
8 Weight
9 Rated voltage, current type
10 Model number
11 Serial number
12 Model name
13 Manufacturer
EN
19