Concluding Work; Service Centre; Environmental Information; Cleaning And Maintenance - Grouw 18002 Manual De Usuario

Use as a barbecue starter
Place the barbecue charcoals or briquettes in
the barbecue.
Attach the ignition nozzle (1) to the hot air
nozzle (13). Switch the weed burner on using
the on/off button (8). Select heat setting III
on the temperature selector (14). Allow the
weed burner to warm up for 45 seconds.
Lower the ignition nozzle towards the
barbecue charcoals or briquettes, which will
ignite within a few minutes.
NB! Do not use solid or liquid � relighters at
the same time as you are igniting barbecue
charcoals or briquettes using the weed
burner.

Concluding work

Once you have � nished working, push the
temperature selector to position I and allow
the weed burner to run for a few minutes so
that it cools down more quickly.
Push the hanger (11) out so that you can put
the weed burner down on a non-� ammable
surface.
Switch the weed burner off using the on/off
button (8) and unplug it.
Allow the weed burner to cool down fully
before putting it away.

Cleaning and maintenance

Clean the weed burner with a brush and
slightly damp cloth after use and always keep
its surfaces and vent holes (4) clean.
Never use corrosive or abrasive cleaning
agents, as they may attack the plastic parts of
the weed burner.
Apply a thin layer of acid-free oil to the weed
nozzle and hot air nozzle before putting the
weed burner away.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com

Environmental information

Electrical and electronic equipment
(EEE) contains materials,
components and substances that
may be hazardous and harmful to
human health and the environment
if waste electrical and electronic equipment
(WEEE) is not disposed of correctly. Products
marked with a crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that waste
electrical and electronic equipment must
not be disposed of with unsorted household
waste, but must be collected separately.
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
© 2019 Schou Company A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
21